×
Shopping Cart
×
Quote List

Clipos™ Pyrene labeled Liposomes, Amine Lipid, PEGylated


Catalog:CDEIMF-1420

Unit Size
Price
$2100

Buy Now Need technical support? Datasheet

Functional GroupAmine
StorageShould always be stored at in the dark at 4 °C, except when brought to room temperature for brief periods prior to animal dosing. DO NOT FREEZE. If the suspension is frozen, the encapsulated drug can be released from the liposomes thus limiting its effectiveness. In addition, the size of the liposomes will also change upon freezing and thawing.
AppearanceBe colored and the color is depend on the type of the fluorescent dye that is used. Usually due to the small size of liposomes no settling will occur in the bottom of the vial. The liposomes are packaged in an amber vial.
DescriptionNumerous techniques have been developed to prepare immunoliposomes based on the nucleophilic reactivity of free amine groups of proteins or peptides. One of the most popular and commonly used methods is to covalently couple free carboxylic groups to primary amines through activation of the carboxyl groups with EDC (1-ethyl-3-[3-dimethylaminopropyl] carbodiimide). EDC, which is a so-called zero-length crosslinking agent, reacts with the carboxyl to form an amine reactive intermediate (O-acylisourea). The produced O-acylisourea can be easily displaced by nucleophilic attack from primary amino groups in the reaction mixture. However, this intermediate is unstable and hydrolyzed in aqueous solutions. In order to prevent the intermediate hydrolysis, sulfo-NHS (N-hydroxysulfosuccinimide) is added to EDC to produce a significantly more stable and more soluble active intermediate (NHS ester). Consequently, the immunoliposomes are prepared by a two-step coupling procedure: first, activating the free carboxyl group on the antibody, peptide or protein with EDC and sulfo-NHS, and then covalently conjugating antibody to the lipids through displacement of sulfo-NHS groups by amine groups of the liposomes, as depicted below. EDC/sulfo-NHS coupling reactions are highly selective and highly efficient, and the biological activity of the protein or peptide is preserved.
Lipid compositionHSPC/Cholesterol/DSPE-PEG(2000)/DSPE-PEG(2000)-Amine (~57/38/4/1 molar ratio)
Liposome Size100 nm
Lipid Molar Concentration~21.58 mM
FluorophorePyrene-DOPE
Excitation351 nm
Emission379 nm
BufferPhosphate Buffered Saline, pH 7.4
Shelf-life2 months.
Technical NotesEDC and sulfo-NHS should be prepared immediately and kept at room temperature before use. The activation reaction with EDC and Sulfo-NHS is most efficient at pH 4.5-7.2, and EDC reactions are often performed in at pH 4.7-6.0. For this reason, we have formulated the liposomes in PBS buffer and adjusted the pH to 6. Reaction of Sulfo-NHS-activated molecules with primary amines is most efficient at pH 7-8, and Sulfo-NHS-ester reactions are usually performed in phosphate-buffered saline (PBS) at pH 7.2-7.5. Tris buffer should never be used in any step of the process since it contains amine. If you are using a ligand or peptide that is hydrophobic then it is recommended to solubilize it in DMSO or DMF and then add the buffer to it. It is recommended not to use more than 5% volume of DMSO or DMF in the solution. DMF and DMSO are both compatible with liposomes and they are also miscible in water. Other organic solvent such as ethanol and chloroform are not compatible with liposomes and will cause the liposomes to lyse. If you end up using DMSO or DMF then after the conjugation reaction is done, you need to remove DMSO and DMF from the liposomes. In order to do that you need to use a dialysis cassette that is made from REGENERATED CELLULOSE MEMBRANE. NOTE: Not all membranes are compatible with DMF and DMSO. We recommend using a Slide-A-Lyzer? MINI Dialysis Device with MWCO of 2K made from regenerated cellulose membrane manufactured by ThermoFisher. After DMSO or DMF is removed you can use Float-A-Lyzer? dialysis device for the final step of cleaning up the prep.
Lipid Mass Concentration~15.89 mg/mL
My Review for Clipos™ Pyrene labeled Liposomes, Amine Lipid, PEGylated

Required fields are marked with *

Overall Rating *
×
Related Products
Product Name Catalog Lipid composition Liposome Size Price
Clipos™ Pyrene labeled Liposomes, Amine Lipid, PEGylated CDEFDP-1883 DOTAP/DOPC/Cholesterol/ 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(6-azidohexanoyl) (ammonium salt) (5/64/30/1 molar ratio) 100 nm $2100
Clipos™ Pyrene labeled Liposomes, Amine Lipid, PEGylated CDEFPC-1839 L-α-PC/Cholesterol/ 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-(dibenzocyclooctyl) (69/30/1 molar ratio) 100 nm $2100
Clipos™ Pyrene labeled Liposomes, Amine Lipid, PEGylated CDEFPC-1831 L-α-PC/Cholesterol/1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(6-azidohexanoyl) (ammonium salt) (69/30/1 molar ratio) 100 nm $2100
Clipos™ Pyrene labeled Liposomes, Amine Lipid, PEGylated CDEFPS-1856 L-α-phosphatidylserine/L-α-PC/Cholesterol/ 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(6-azidohexanoyl) (ammonium salt) (20/49/30/1 molar ratio) 100 nm $1980
Clipos™ Pyrene labeled Liposomes, Amine Lipid, PEGylated CDEIMF-1422 HSPC/Cholesterol/DSPE-PEG(2000)/DSPE-PEG(2000)-Biotin (~57/38/4/1 molar ratio) 100 nm $2100
Clipos™ Pyrene labeled Liposomes, Amine Lipid, PEGylated CDEFDP-1885 DOTAP/DOPC/Cholesterol/ 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(6-azidohexanoyl) (ammonium salt) (5/64/30/1 molar ratio) 100 nm $2100
Clipos™ Pyrene labeled Liposomes, Amine Lipid, PEGylated CDEFDP-1819 DOTAP/DOPC/Cholesterol/1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-(dibenzocyclooctyl) (5/64/30/1 molar ratio) 100 nm $2100
Clipos™ Pyrene labeled Liposomes, Amine Lipid, PEGylated CDEIMF-1504 L-a-PC/Cholesterol/1,2-Dioleoyl-sn-glycero-3-phosphoethanolamine-N-(succinyl) (~69/30/1 molar ratio) 100 nm $2100
Products
Fill out the form below
to receive a quote

GET A QUOTE

Cookie Policy | Privacy Policy | Copyright © CD Bioparticles. All rights reserved.
×
Upload products to cart

1. Download the template.

2. Enter product information on the template (maximum number of products: 200).

3. Load the file using selector below.

Drag and drop your file here or

Choose file
*.xlsx (max 20 MB)

4. Click the "Add to cart" button.

×
Upload products to quote list

1. Download the template.

2. Enter product information on the template (maximum number of products: 200).

3. Load the file using selector below.

Drag and drop your file here or

Choose file
*.xlsx (max 20 MB)

4. Click the "Add to quote" button.