×
Shopping Cart
×
Quote List
0Quotes
0Cart

Clipos™ DiA labeled Liposomes, PDP Lipid, PEGylated

Catalog:CDEIMF-1322

Unit Size
Price
$2100

Buy Now Need technical support? Datasheet

Specifications QA & Reviews
Functional GroupPDP
StorageShould always be stored at in the dark at 4 °C, except when brought to room temperature for brief periods prior to animal dosing. DO NOT FREEZE. If the suspension is frozen, the encapsulated drug can be released from the liposomes thus limiting its effectiveness. In addition, the size of the liposomes will also change upon freezing and thawing.
AppearanceBe colored and the color is depend on the type of the fluorescent dye that is used. Usually due to the small size of liposomes no settling will occur in the bottom of the vial. The liposomes are packaged in an amber vial.
DescriptionThe liposomes containing pyridyldithiopropionate (PDP) lipids are used to conjugate proteins, antibodies and other molecules containing the reactive moiety. PDP lipids are not as widely used as maleimide lipids, but they do have their own niche application. The PDP group contains disulfide, which can react with sulfhydryl or thiolated proteins/antibodies. Therefore, PDP-functionalized liposomes can be used in two ways: A) maleimide-modified antibody to a PDP-modified liposome; B) thiol-modified antibody to a PDP-modified liposome.
Lipid compositionHSPC/Cholesterol/DSPE-PEG(2000)/DSPE-PEG(2000)-PDP (~57/38/4/1 molar ratio)
Liposome Size100 nm
Lipid Molar Concentration~21.58 mM
FluorophoreDiA
Excitation456 nm
Emission590 nm
BufferPhosphate Buffered Saline, pH 7.4
Shelf-life2 months.
Technical NotesAfter conjugation reactions, liposomes containing excess maleimide or thiol groups may exhibit undesirable qualities, such as aggregation, reactions in vitro and in vivo, and immunogenicity. These reactive moieties can be quenched with reagents containing iodo-, maleimide, or sulfhydryl groups where appropriate. This is likely to be a particularly serious problem for thiolated liposomes. Therefore, it is recommend that the antibody be thiolated in order to generate the appropriate reactive entities for the final conjugation reaction. In order to prevent oxidation of sulfhydryl on antibody and formation of disulfide bridge, the coupling reaction must be performed under an inert atmosphere such as argon or nitrogen. To set up an inert gas chamber we recommend using Aldrich?-Atmosbag with is a flexible, inflatable polyethylene chamber with built-in gloves which is a portable and inexpensive alternative to laboratory glove box. Maleimide group on lipid is highly sensitive of alkaline pH and it will hydrolyze rapidly at higher pH. Experimental investigations have been shown that in alkaline condition (pH > 7.5), maleimide and its derivatives are hydrolyzed to a non-reactive maleamic acid (see the figure below). This instability should be considered account in any quantitative procedures, such as coupling with sulfhydryl groups. Therefore, it is very important to make sure that the pH of the reaction with stay between 6.5 and 7 during the entire process. If your goal is to conjugate a thiolated protein/antibody containing reactive sulfhydryl to liposomes to form an immunoliposome, it is recommended to use liposomes containing maleimide reactive lipids. The amount of the maleimide-activated protein/antibody bound per liposome in Method A depends on the number of free thiols on the liposome surface (formed in step 1) and the reaction efficiency increase with increasing PDP/mAb molar ratio in the incubation mixture. If you are using a ligand or peptide that is hydrophobic then it is recommended to solubilize it in DMSO or DMF and then add the buffer to it. It is recommended not to use more than 5% volume of DMSO or DMF in the solution. DMF and DMSO are both compatible with liposomes and they are also miscible in water. Other organic solvent such as ethanol and chloroform are not compatible with liposomes and will cause the liposomes to lyse. If you end up using DMSO or DMF then after the conjugation reaction is done, you need to remove DMSO and DMF from the liposomes. In order to do that you need to use a dialysis cassette that is made from REGENERATED CELLULOSE MEMBRANE. NOTE: Not all membranes are compatible with DMF and DMSO. We recommend using a Slide-A-Lyzer? MINI Dialysis Device with MWCO of 2K made from regenerated cellulose membrane manufactured by ThermoFisher. After DMSO or DMF is removed, you can use Float-A-Lyzer? dialysis device for the final step of cleaning up the prep.
Lipid Mass Concentration~15.93 mg/mL
My Review for Clipos™ DiA labeled Liposomes, PDP Lipid, PEGylated

Required fields are marked with *

Overall Rating *
×
Related Products
Product Name Catalog Lipid composition Liposome Size Price
Clipos™ DiA labeled Liposomes, PDP Lipid, PEGylated CDEIMF-1356 HSPC/Cholesterol/DSPE-PEG(2000)/DSPE-PEG(2000)-DBCO (~57/38/4/1 molar ratio) 100 nm $2100
Clipos™ DiA labeled Liposomes, PDP Lipid, PEGylated CDEIMF-1482 L-a-PC/Cholesterol/1,2-Dioleoyl-sn-glycero-3-phosphoethanolamine-N-(glutaryl) (~69/30/1 molar ratio) 100 nm $2100
Clipos™ DiA labeled Liposomes, PDP Lipid, PEGylated CDEIMF-1497 HSPC/Cholesterol/DSPE-PEG(2000)/DSPE-PEG(2000)-Succinyl (~57/38/4/1 molar ratio) 100 nm $2100
Clipos™ DiA labeled Liposomes, PDP Lipid, PEGylated CDEIMF-1431 HSPC/Cholesterol/DSPE-PEG(2000)/DSPE-PEG(2000)-Biotin (~57/38/4/1 molar ratio) 100 nm $2100
Clipos™ DiA labeled Liposomes, PDP Lipid, PEGylated CDEIMF-1332 L-a-PC/Cholesterol/1,2-Dioleoyl-sn-glycero-3-phosphoethanolamine-N-[3-(2-pyridyldithio)propionate] (~69/30/1 molar ratio) 100 nm $2100
Clipos™ DiA labeled Liposomes, PDP Lipid, PEGylated CDEFPS-1862 L-α-phosphatidylserine/L-α-PC/Cholesterol/ 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-(6-azidohexanoyl) (ammonium salt) (20/49/30/1 molar ratio) 100 nm $2100
Clipos™ DiA labeled Liposomes, PDP Lipid, PEGylated CDEFPG-1891 1,2-dioleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (sodium salt)/DOPC/Cholesterol/1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-(dibenzocyclooctyl) (20/49/30/1 molar ratio) 100 nm $2100
Clipos™ DiA labeled Liposomes, PDP Lipid, PEGylated CDEIMF-1464 HSPC/Cholesterol/DSPE-PEG(2000)/DSPE-PEG(2000)-Cyanur (~57/38/4/1 molar ratio) 100 nm $2100
Products
Fill out the form below
to receive a quote

GET A QUOTE

Services

Drug Targeting Strategy

Drug Delivery Nanoparticles Formulation

Bioparticles Analysis and Characterization

Bioactive Particles & Fillers Production

Functional Biomedical Coatings

Lipid Library Development for Drug Delivery

Aptamer Targeted Drug Delivery System

Other Types of Drug Delivery

Products

Liposome System

Chelating Agents

Bioactive Matrixes

Porous Organic Materials

Biopolymers & Synthetic Polymers

PROTAC

Transfection

Exosome Products

Cleavable Linkers

Pharmaceutical Excipients (drug/medical grade)

Tissue Engineering Scaffold

  • (USA)
  • (Europe)
Cookie Policy | Privacy Policy | Copyright © CD Bioparticles. All rights reserved.
×
Upload products to cart

1. Download the template.

2. Enter product information on the template (maximum number of products: 200).

3. Load the file using selector below.

Drag and drop your file here or

Choose file
*.xlsx (max 20 MB)

4. Click the "Add to cart" button.

×
Upload products to quote list

1. Download the template.

2. Enter product information on the template (maximum number of products: 200).

3. Load the file using selector below.

Drag and drop your file here or

Choose file
*.xlsx (max 20 MB)

4. Click the "Add to quote" button.